Model

SG-PTZ020W-D

SG-PTZ020W-D

SG-PTZ020W-D

Standard

Customizable

Color

Ice gray

Army green, Black, White, *Customizable

Angle

0°～360°continuously

0°～≤320°limited/*0°～＞320°limited

Speed

Pan：0.01°/S～20°/S

Pan：*30°/S～*55°/S  optional

The greater the speed, the smaller the load

Preset

200

*1000

Positioning accuracy

±0.1°

No

Shelf-check

Power-on auto-check

* No self-check (memory battery version/absolute encoder version)

Real-time feedback

Query/Real-time feedback

Note: RS485 interface does not support real-time feedback

Auxiliary switch

No

1~2 channels, passive, normally open (commonly used for power on/off, signal, wiper control, etc.)

Auto-cruise

2 lines，40 presets each line

No

Auto-homing

1～60m minutes adjustable

No

Auto-scan

1

No

Anti-salt-fog

No

The pH value is between 6.5-7.2, and there is no obvious change on the surface after continuous spraying for 48 hours

Protocol

PELCO_D

PELCO_P; ModBus-RTU; *Customizable

Baud rate

9600bps

2400/4800/115200bps

Communication interface

RS422

RS485/RS232 */*RJ45

Power voltage

DC24V

*DC48V

Power consumption

≤35W

≤45W

Note: Will change with the change of functional indicators

Standby consumption

≤2W

Note: Will change with the change of functional indicators

Working temp.

-25℃～+65℃, Non-condensing

*-40℃～+65℃，Non-condensing

Storage temp.

-40℃～+65℃

No

Load

10Kg

20Kg

50Kg

Note: The center of gravity is right above the top plate, rotation diameter 200mm. As the speed and diameter of rotation increases, the corresponding load capacity will decrease.

Dimension

180*130*197mm (L*W*H)

254*254*160mm (L*W*H)

250*180*264mm (L*W*H)

* Customized appearance

Weight

5Kg

7.5Kg

12Kg

Note: Will change with the change of functional indicators

Loading type

Top-load

No

Locking

Self-locking

No

Protection grade

IP66

No

Installation

Base fixed installation

*Vehicle mounted/*Hoisting/*Ship mounted

Note: If vehicle/ship mounted, the loading capacity is approximately halved when vehicle/ship is moving.

System type

Open loop system (no encoder)

* Closed-loop system (absolute encoder/incremental encoder)

Top outlet

1×straight signal cable（4-core）

1×DC24V(2A）

Normal power supply/normal signal /* High power supply /*USB3.0/* Gigabit ethernet /*RF（0～3G/3G～18G）/*Optical fiber/*Others

Note: The upper outlet is used to supply power and communication to the equipment on the pan/tilt.

Base outlet

1×straight signal cable（4-core）

1×DC24V

1×RS422

Normal power supply/normal signal /* High power supply /*USB3.0/*Gigabit ethernet/*RF（0～3G/3G～18G）/*Optical fiber/*Others

Note: The lower outlet is used to supply power and communication to the pantilt and the equipment on it.

Note: The functions marked with * are charged extra. Please be advised.